Properly operate the aluminum cutting machine to cut perfect aluminum

The insulating glass complete equipment manufacturer tells you: the aluminum processed from the factory is a large-area aluminum plate and cannot be directly used in real life. The aluminum plate needs to be cut and processed. At this time, aluminum cutting The cutting machine is particularly important, but there are many things to pay attention to when operating the cutting machine, did you know?

1. The operator of the aluminum cutting machine needs to be familiar with the various performances of the equipment, understand the habits of the equipment, and be able to ensure the normal and stable operation of the equipment. Operators need to follow correct operating procedures and follow formal procedures during actual operations to avoid accidents.

2. The operator must concentrate when performing cutting operations and cannot be distracted in the slightest. Because the cutting of the aluminum cutting machine is very sharp, a little carelessness will cause disastrous consequences.

At the same time, operators also need to avoid cutting when they are tired, drunk, taking drugs, etc. to avoid danger.

3. The circuit layout of the aluminum cutting machine must be strictly in accordance with the requirements of the instruction manual and the safety regulations in the instruction manual. Remember not to pull the power line without permission to avoid circuit faults such as open circuits and short circuits.

Before using the cutting machine equipment, we need to conduct a comprehensive inspection of all aspects of the machine's performance. Only after making sure that all functions are intact can it be put into actual use.

4. Operators need to wear work clothes before using the machine. The work clothes need to fit well and should not be too large or too loose to avoid adverse effects on the cutting operation. And do not have long hair or wear jewelry. Otherwise, the hair or jewelry will fall into the groove of the equipment, which will cause damage to the equipment assembly at least, and threaten the life safety of the operator at worst.

5. When using an aluminum cutting machine to cut aluminum plates, we need to place the grinding wheel. When the grinding wheel has burrs, it should be replaced in time instead of resting on the grinding wheel. Because excessive grinding of the grinding wheel will cause the thickness of the grinding wheel to become thinner, making the texture of the grinding wheel brittle, which may cause the grinding wheel to break when cutting aluminum materials.

The precautions for using the aluminum cutting machine have been introduced in detail above. If you want the aluminum cutting machine to run more efficiently, these precautions are essential. For more details, you can log in to our website. Please visit the company’s official website for more detailed information.