Do you know how to maintain and care for corner-assembly equipment?

Corner assembly equipment is commonly seen in our daily lives. For example, a corner assembly machine is a device used to assemble the corners of aluminum alloy doors and windows, bringing convenience to our lives. In daily production work, the maintenance of the machine is also very important. Let's learn together how to maintain corner assembly equipment!

Before use, wear appropriate personal protective equipment and strictly prohibit unauthorized operation. The transmission parts of the corner assembly machine require frequent lubrication to ensure sufficient oil level and prevent jamming, which would affect the corner assembly effect. The work area and worktable of the corner assembly machine should be cleaned, and the blade plane should be adjusted to be parallel to the worktable surface. Always pay attention to the cleanliness of the blade surface and the worktable surface to prevent rust and ensure the corners are free of impurities.

The oil level in the tank should be maintained at the marked line to prevent the oil pump from drawing air. For frequent use, the oil tank should be cleaned every two months, and the oil filter should be cleaned every six months, along with replacing the oil. When assembling angled profiles, the protective film near the angled end face should be removed, and the end face should be cleaned thoroughly to prevent gaps after assembly. High-pressure hoses should be inspected regularly, as prolonged use will lead to hose aging, and damage at various points will reduce the hose's pressure resistance.

The normal operating oil temperature is 20℃-50℃. If the oil temperature is too high, cooling measures must be taken or the pump must be stopped. Normal operation can only resume after the oil has cooled sufficiently. The pump's operating pressure must not be arbitrarily adjusted. If the oil temperature is too low, direct operation is prohibited; heating measures must be taken, such as external heating or low-pressure operation, to increase the oil temperature. After work is completed, turn off the power first, and clean the work surface and the area around the equipment to ensure the corner assembly machine is in a clean and tidy environment. The corner assembly machine requires regular inspection and maintenance to eliminate potential safety hazards.

The above covers the daily maintenance of corner-assembly equipment. Regular maintenance can not only extend the machine's lifespan but also reduce potential safety hazards and repair costs. We hope this information is helpful!